Epoxy primer for concrete and masonry surfaces
Perdure E02 is industrial grade epoxy primer for concrete, plywood, ceramic tile or any hard wearing surfaces. It exhibits excellent adhesion and stops outgassing.
Perdure E02 is industrial grade epoxy primer for concrete, plywood, ceramic tile or any hard wearing surfaces. Exhibits excellent adhesion and stops outgassing. It combines the properties of water insensitivity with good wetting properties. It provides excellent filling and sealing properties needed under high-performance epoxy floor coatings on concrete. The moisture tolerance of Perdure E02 allows it to be applied to damp concrete after surface preparation. This includes bonding “old to old” or “new to old” concrete.
Features
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 1.50gal, 3.00gal, 15.00gal |
Technical Details
| Viscosity @ 75°F | 400 – 450cp | Pot Life | 30-40 minutes @ 75°F |
| Mixing Ratio | 2 parts A to 1 parts B by volume | Dry to Touch | 6–8 hours @ 75°F |
| Solids Content | 100% Solids by volume | Re-Coat (regular cure) | 10–12 hours @ 75°F |
| Volatile Organic Content | 0 | Re-Coat (fast cure) | 4-6 hours @ 75°F |
| Gloss, 60°F | Low sheen | Full cure, maximum resistance | 5 Days |
| Weight Per gallon | 9.00–9.50 pounds per gallon, mixed |