Perdure U45 Urethane Matte Sealer
Water-based, Non-yellowing Urethane Matte Sealer
Perdure U45 is a two-component water-based aliphatic (non-yellowing) urethane matte sealer. Perdure U45 is free of the health and environmental problems normally found in solvent-based urethanes while maintaining excellent performance. It is a high-performance coating for use in a variety of seamless floor and wall coating systems.
Perdure U45 gives a matte finish. It has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors, and as a seal coat for most duraamen’s floor and wall coating systems
Features
- Excellent abrasion resistance
- Excellent chemical and stain resistance
- Suitable for both exterior and interior applications
- It may be used for both horizontal and vertical applications
Installation
Mix each component of Perdure U45 Urethane Matte Sealer prior to combining together. Mix 4 Parts A with 1 Part B. Mix only that amount of material that can be used in 60 minutes.
In hot weather conditions, plan on working during the cooler times of the day. Always try to keep a wet edge during application.
For installation instructions specific to your project, please contact your Duraamen representative.
Downloads
Photos
